To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This quiet, aerodynamic roof rack lets you carry gear on your vehicle with fixed mounting points. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.
Features:
Specs:
The low-profile, aerodynamic Rhino-Rack RVP roof rack lets you carry gear and accessories on your vehicle's roof quietly and with little wind drag. It's designed for installation on a vehicle with fixed mounting points (or flush side rails with internal fixed mounting points). The rack's Vortex Aero crossbars have built-in rubber strips that disrupt airflow for a quiet ride, and the bars are constructed of aluminum so they won't rust. These bars blend seamlessly with the support legs to provide a from-the-factory look, and they are custom cut to your specific vehicle so they require no adjustment during installation. The legs also include built-in locks that protect your gear and the rack from theft.
The rubberized Vortex strips in the top channel of each crossbar disrupt airflow with evenly spaced, wave-shaped grooves. This carefully controlled turbulence minimizes wind noise and whistling, so you won't need to add a fairing to your roof rack. And the slim, elliptical Vortex Aero crossbars cut through the air with minimal drag - even at highway speeds.
The RVP roof rack has a flush-mount design so the crossbars terminate at the legs with no overhang. This provides the rack with a seamless, from-the-factory look.
The Vortex Aero crossbars are made of structural-grade anodized aluminum with H-shaped internal extrusions. These extrusions strengthen the bars without adding a significant amount of weight. And the aluminum bars won't rust so you can leave them on your roof year-round.
The rack's durable, glass-reinforced nylon legs are designed to stand up to cargo loads and weather extremes. They're also UV treated to withstand long-term exposure to sunlight.
Each crossbar has a built-in C-channel so you can carry channel-mounted accessories such as bike racks, watersport carriers, and ski racks. The Vortex strips in the top channels come in pieces, so they're easier to adjust than a single long, continuous strip. You can remove, trim, and re-insert the Vortex strips around the mounting hardware of your accessories to keep the crossbar channels capped and quiet. Replacement strips (sold separately) are also available if you remove your accessories or switch to clamp-on accessories.
You can also attach most clamp-on accessories to the bars, and the Vortex strips provide a shock-absorbing, no-slip cushion for any accessories that rest on them.
Locking covers on each support leg let you secure accessories mounted in the crossbar top channels. These sturdy nylon covers give the rack a finished look and also help secure the rack to your roof. The cover locks are keyed alike, so a single key opens all locks.
Average Customer Rating: 4.6 out of 5 stars (297 Customer Reviews)
This quiet, aerodynamic roof rack lets you carry gear on your vehicle with fixed mounting points. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.Easy to install, it's very strong, easy to transport my kayaks, and my attached Thule Stackers work well with it. It's a great rack mounted on my factory Honda CRV roof rails.
So far so good! Haven't loaded it yet but it is sturdy and solid. Everything came perfectly cut to fit, zero issues whatsoever! The rails were aftermarket and there were no issues with those being compatible with the cross bars either. Plan to add bike racks and cargo box. etrailer gets it right!
Replaced Honda CRV rack. This was flatter side to side which helped me achieve the solution I wanted. We’ll made, easy on/off, quiet.
The rack mounts quickly and easily to an aero shaped bar. The ability to attach a kayak paddle is pleasant to keep the paddle out of the car. The included straps are of good quality. The system for adjusting the angle is quick, secure and effective. It is easy to lay flat when not in use. The bars have nice padding. It appears to be well built.
Rack is solid, attractive, and well made. The "rack kit" comprises three separate kits; the base kit which includes the brackets and hardware that attach to the oem rails on the vehicle, the feet kit which attach to the crossbars to allow the crossbars to attach to the base rail brackets. Consequently, I found the printed instructions lacking in content and continuity (more on that later), but overall the install is reasonably straight forward and intuitive.
As someone with arthritic thumbs I found inserting the mounting screws and attaching the rubber skirts to the base rail brackets, along with insertion of the rubber strips into the crossbars to be somewhat of a challenge. In addition, the feet kit was short on mounting hardware and the hex-head cap screws supplied were not desirable for mounting feet to base brackets so I sourced replacement hardware locally.
Back to content and continuity of written instructions. No mention that crossbars were location specific and cut too different lengths and can be distressing if you don't think to check fit at the start of installation.
Otherwise, the rack looks good and is solid on the roof. I have not noticed any appreciable increase of wind noise before/after rack install and would not hesitate to recommend to a friend.
P.S. Jesse and the folks at etrailer were great to work with/answer questions.
Worked perfect for my 2019 Jeep Grand Cherokee Limited. Purchased to pair with Rhino-Rack S512 kayak roof racks.
The racks look very OEM when installed. Had an issue with initial fitment. Spoke with Etrailer and Rhino folks who were very helpful. Essentially feet of mounts needed to be shortened about 1/2 inch for flush fitting on Range Rover L322 roof line. Went very well after that. Have already placed an 80 pound kayak on and no issues with stability etc. Very well made and happy with the end result
Perfect fit, easy installation, 10mm socket wrench,Phillips screwdriver, safety pin is all that is needed
Installation was easy and the rack seems very secure. It has plenty of clearance for the panoramic sunroof on my 2019 Hyundai Santa Fe.
Rack looks good. Will try it out in a few weeks. Thanks for the video instructions ETrailer. The written instructions aren’t the greatest.
Perfect fit, very sturdy super easy to install with all the right hardware stoked I got a deal like this !
Finally finished my Rhino-rack roof rack install on my 2022 Hyundai Kona. I had problems understanding confusing directions and found out after calling and sending a video that there were wedges missing from my original shipment. I thought the bolts were too long only because pieces were missing. I thank Wayne from customer service for helping me figure this out and shipping them out next day air. I am happy with the install and they are sturdy and high quality. Just think they should make directions easier to understand. Happy customer just in time as we are planning a vacation starting tomorrow night to the beach! Good job etrailer.com!
I ordered a rack for a car with raised rails on the roof and fixed mounting points on the inside of those rails. Etrailer sent a rack with mounts that are made for a car with no rails on the roof. I’m supposed to get two crossbars - there’s three in the box, one is longer than the other two. Why? Who does that? Either I was sent a box with random parts from a previously returned rack or it was packed wrong at the factory. Either way, the quality control is clearly trash from the factory and on this product line in general. The best part is, it arrived a day later than it was supposed to, and there’s no time to get another one sent before it’s needed. Whether the factory blew it or not, the shipping is on etrailer.
Great looking bar. Would have gave it a five star except the instructions for a 2018 Honda HRV have a lot to be desired. Roof rails were factory installed with no bolts pointed up for Rhino racks mounting. Had to rework factory mounts with straight threaded rods in order for Rhino installation to attach to Honda roof rails.
I purchased a Rhino Rack RVP Roof Rack (RRRVP27) for my 2015 Jeep Grand Cherokee Summit. The product installation was straightforward and the crossbars have a sleek finished look. I use the crossbars in conjunction with two Thule Sidearm 594XT bicycle racks and the setup works great.
I appreciate that the product blends in nicely with the look of the vehicle as the crossbars do not extend past the roof line and that security locks are included with the system.
One drawback is that the crossbars, which are designed to be whisper quiet, whistle while driving. I have a panoramic sunroof which may be a contributing factor to the increased noise levels and this may vary with a traditional roof.
Perfect fit. Solid attachment to existing roof rails
top quality materials, instructions could have been a little more detailed but it was pretty easy to assemble/install otherwise. I wish Rino-Rack have a silver/brush aluminum version instead of only black (the box actually shows a silver rack). Haven't driven with the racks installed yet so I don't know how quiet they are. I have a set of Thule Aero bars that are whisper quiet so I'm hoping these are the same. I would recommend.....
Received two different sized bars, neither of which fit my vehicle
I purchased these crossbars for my 2021 Jeep Grand Cherokee. The fit guide from Rhino Rack indicated that they are "not confirmed to fit." However, I took a chance and they fit perfectly. They actually look like they were installed at the factory.
Every thing fit great and looks great too. Only issue I had was there were no bolts to fasten the risers to the base. Had to find the correct size metric bolts to complete the project. The installation video was very helpful.
Installation was straightforward and I feel stronger than the factory crossbars which clamp on, as these cross bars screw into the connect points for the rails. These rails are also flatter than the factory installed rails. But are not perfectly flat. Roof-mounted bike racks may still lean a little bit. Which what I was trying to solve by replacing the factory cross rails/bars.
I love this rhino rack it'so beautiful so good fits perfectly for my jeep grand cherokee all hardware is good I really love it and I totally recommend it I totally recommended fits perfectly the price is so good don't even waste your time with something else just go ahead and buy it and it was fast delivery 5 star for sure
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Craig
11/2/2023
It’s great. I use it for my kayaks and take them out 1-2 times a week. It’s sturdy, looks good on the car. I highly recommend Rhino Rack roof racks.